GP40M
SINTERED GLASS JUNCTION
PLASTIC RECTIFIER
VOLTAGE: 1000V
CURRENT: 4.0A
DO-201AD
FEATURE
High temperature metallurgically bonded construction
Sintered glass cavity free junction
Capability of meeting environmental standard of
MIL-S-19500
High temperature soldering guaranteed
350°C /10sec/0.375”lead length at 5 lbs tension
Operate at Ta =55°C with no thermal run away
Typical Ir<0.1µA
MECHANICAL DATA
Terminal: Plated axial leads solderable per
MIL-STD 202E, method 208C
Case: Molded with UL-94 Class V-0 recognized Flame
Retardant Epoxy
Polarity: color band denotes cathode
Mounting position: any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated,
for capacitive load, derate current by 20%)
SYMBOL
GP40M
units
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Vrrm
Vrms
Vdc
1000
700
V
V
V
Maximum DC blocking Voltage
1000
Maximum Average Forward Rectified Current
3/8”lead length at Ta =55°C
Peak Forward Surge Current 8.3ms single Half
sine-wave superimposed on rated load
Maximum Forward Voltage at Forward Current
6.0A and 25°C
If(av)
Ifsm
Vf
4.0
125.0
1.3
A
A
V
Maximum full load reverse current full cycle
Average at 55°C
Ir(av)
100.0
µA
5.0
100.0
3.0
Maximum DC Reverse Current
at rated DC blocking voltage
Ta =25°C
Ta =150°C
Ir
µA
Typical Reverse Recovery Time
Typical Junction Capacitance
Typical Thermal Resistance
(Note 1)
(Note 2)
(Note 3)
Trr
Cj
µS
pF
40.0
Rth(ja)
Tstg, Tj
20.0
°C /W
°C
Storage and Operating Junction Temperature
Note:
-65 to +175
1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A
2. Measured at 1.0 MHz and applied reverse voltage of 4.0Vdc
3. Thermal Resistance from Junction to Ambient at 3/8”lead length, P.C. Board Mounted
Rev.A1
www.gulfsemi.com
GULFSEMI [ GULF SEMICONDUCTOR ]
