星合电子
ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ
FEATURES
l
Low profile package
l
Built-in strain relief
l
l
l
l
l
Glass passivated junction
Low inductance
Typical I
R
less than 1
£gA
above 11V
High temperature soldering :
260
¢J
/10 seconds at terminals
1N5926B THRU 1N5956B
GLASS PASSIVATED JUNCTION SILICON ZENER DIODE
VOLTAGE - 11 TO 200 Volts
Power - 1.5 Watts
DO-41
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
MECHANICAL DATA
Case: JEDEC DO-41 Molded plastic over passivated junction
Terminals: Solder plated, solderable per MIL-STD-750,
method 2026
Polarity: Color band denotes positive end (cathode)
Standard Packaging: 52mm tape
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25
¢J
ambient temperature unless otherwise specified.
SYMBOL
P
D
DC Power Dissipation @ T
L
=75
¢J
, Measure at Zero Lead Length(Note 1, Fig. 1)
Derate above 75
¢J
Peak forward Surge Current 8.3ms single half sine-wave superimposed on rated
I
FSM
load(JEDEC Method) (Note 1,2)
Operating Junction and Storage Temperature Range
T
J
,T
STG
NOTES:
2
1. Mounted on 5.0mm (.013mm thick) land areas.
2. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle = 4 pulses
per minute maximum.
3. ZENER VOLTAGE (Vz) MEASUREMENT Nominal zener voltage is measured with the device
function in thermal equilibrium with ambient temperature at 25
¢J
.
4.ZENER IMPEDANCE (Zz) DERIVATION Z
ZT
are measured by dividing the ac voltage drop across
the device by the accurrent applied. The specified limits are for I
Z(ac)
= 0.1 I
Z
, (dc) with the ac freqency = 60Hz.
VALUE
1.5
15
10
-55 to +150
UNITS
Watts
mW/¢J
Amps
¢J
1
ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ ＴＥＬ：０５３６－２２１０３５９ ＱＱ：４６４７６８０１７
GXELECTRONICS [ Gaomi Xinghe Electronics Co., Ltd. ]
