3
Output Formats
•
M5676 Fast Single Sweep Unit
1 : 0.7 (50 mm : 35 mm)
F/2.0
Temporal resolution........................ Better than 2 ps at 800 nm (1.5 ps typ.)
Sweep time Video output type ....... 0.15, 0.5, 1, 2, 5, 10, 20, 50 ns/full screen
Lens output type ........ 0.2, 0.5, 1, 2, 5, 10, 20, 50 ns/full screen
Trigger jitter ................................ Better than 20 ps
Trigger delay ................................ Approx. 13 ns (fastest range)
Maximum sweep repetition frequency (max.)... 10 kHz
Trigger signal input .......................
±
5 V/50
Ω
•
Lens output
..... Magnification
Effective F value
F-mount
•
Video output
... Signal format
CCIR or RS-170
Coupling method Fiber optics
Resolution
768
×
493 or 756
×
581 pixels
4
Other 5680 Specifications
•
Gate
Gating Method
MCP + horizontal blanking
MCP + horizontal blanking + photocathode
Gate Extin-
ction Ratio
Gate Time
1 : 10
6
min. 50 ns to continuous
1 : 10
8
min. 50 ns to continuous
•
•
•
•
•
Gate trigger input ....................................... 3.5 V to 5.0 V/50
Ω
Gate trigger delay time ...................................... 120 ns max.
Max. horizontal blanking repetition frequency ............ 2 MHz
Max. MCP gate repetition frequency ......................... 10 kHz
Max. photocathode gate repetition frequency ........... 10 kHz
•
M5677 Slow Single Sweep Unit
Temporal resolution.......................
Sweep time ...................................
Trigger jitter ...................................
Trigger delay .................................
Maximum sweep repetition frequency (max.)..
Trigger signal input .......................
Better than 50 ps
50 ns to 1 ms/full screen
Better than temporal resolution
Approx. 45 ns (fastest range)
2 MHz (fastest range)
±
5 V/50
Ω
•
Monitor out signal ................ 3.5 Vp-p (typ.)
•
Interface ............................... IEEE-488 (GP-IB)
•
Status output ....................... D sub-connector DB-25S, 16-bit
parallel output, open collector
•
Line voltage ......................... AC110/117/220/240 V, 50/60 Hz
•
Power consumption ............. Approx. 180 V
•
A
2
Sweep units
(Plug-in: built into main unit)
•
M5675 Synchroscan Unit
Temporal resolution................... Better than 2 ps at 800 nm (N5716-01)
Better than 3 ps at 800 nm (N5716-02)
Sweep range Video output type . 150 ps to 1/6 fs (fs:synchroscan frequency)
Lens output type ... 200 ps to 1/6 fs
Sweep range ........................... 4 selectable range
Synchroscan frequency ............ Factory set within a range of 75 MHz
to 165 MHz
Synchronous frequency range .. fs
±
0.2 MHz (fs = synchroscan frequency)
Trigger jitter ........................... Better than temporal resolution
Trigger signal input .................... –3 dBm to 17 dBm / 50
Ω
3
Function Expansion Units (connected to
•
M5678 Synchronous Blanking Unit
(designed for use in conjunction with M5675 Synchroscan)
Synchroscan frequency ........ Factory set within a range of 75 MHz to 165 MHz
Horizontal shift width ............. 2.5 mm or 11 mm (at phosphor screen)
top of main unit)
•
M5679 Dual Time Base Extender Unit
(Can be used in conjunction with all sweep units)
Sweep time ...................................... 10 ns to 100 ms/full screen
Maximum sweep repetition frequency (max.) ... 10 Hz
Trigger signal input ..........................
±
5 V/50
Ω
4
HAMAMATSU [ HAMAMATSU CORPORATION ]
