Hebei I.T. (Shanghai) Co., Ltd.
.
LED SPECIFICATION
Part No./型号:PLCC6W6
10、Notes/注意
10.1 Moisture Proof Packaging/防½包装
10.1.1 LEDs need to package in moisture proof bag. When moisture is absorbed into the SMT
package it may vaporize and expand during soldering. There is a possibility that this can cause
exfoliation of the contacts and damage to the optical characteristics of the LEDs. For this reason,
the moisture proof bag is used to keep moisture to a minimum in the bag.
产品必须包封装在防½包装袋中。½湿气进入防½包装袋的时候，在焊接时，湿气会
受热½化膨胀，从而可½½响产品的光学特性，甚至造成封装胶½的开裂剥离。因此，防
½袋要求放½在保持½湿度的盒中。
10.1.2 Moisture proof function is inactive. The moisture proof bag is made of an aluminum
moisture proof bag. A package of a moisture absorbent material (silica gel) is inserted into the
aluminum moisture proof bag. The silica gel turns the smashing from the transparent circular
spherical pellet.
防½的½用是缓慢的。防½袋½用铝防½袋，并在铝防½袋中放入½气吸收材料（硅
胶干燥剂）。½硅胶干燥剂吸收½气后，硅胶干燥剂从透明圆½球状颗粒变成粉碎物。
10.2 Storage Method/储存方式
10.2.1 Before opening the bag: The LEDs should be used within a year and kept at 30℃ or less and
70%RH or less. The moisture proof bag with absorbent material is needed when storing the
LEDs.
拆开包装袋之前：产品可以½用一年，½要求放½在温度½于30℃,湿度½于70%的环
境中；½存放产品时，必须放½在带有干燥剂的防½容器中。
10.2.2 After opening the bag: The LEDs should be soldered within 72 hours after opening the
package. If unused LEDs remain, they should be stored in moisture proof bags with moisture
absorbent material. If the LEDs have exceeded the storage time or the moisture absorbent
material has faded away. Baking process should be performed by using more than 24hours
baking at 60±5℃ before using LEDs. It recommended that the user use the LEDs as soon as
possible.
9/12
PDF created with pdfFactory Pro trial version
HB [ HB ELECTRONIC COMPONENTS ]
