H HiTRON
UNIVERSAL INPUT AC-DC MEDICAL APPLICATION OPEN FRAME
SINGLE OUTPUT 40 WATTS INTERNAL SWITCHING
POWER SUPPLIES HMI40 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
COMPACT 5”x 3” PCB FORMAT
MEET MEDICAL STANDARD EN 60601-1/
UL 2601-1
EMI MEET EN 55011 & FCC CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage:
Range typ. 90-264Vac.
Rating 100 to 240Vac.
Input Connector:
V-M connector.
Input Frequency:
47-63Hz.
Inrush Current:
Typ. 2.36Arms @230Vac.
Input Current:
Typ. 0.66A@115Vac, 0.37A @230Vac.
Dielectric Withstand:
Meet IEC 60601-1.
EMI:
Meet EN55011 & FCC Class B.
Hold-up Time:
Typ. 14mS @115Vac, 78.4mS @ 230Vac.
Earth Leakage:
Less than 0.12mA @230Vac.
OUTPUT SPECIFICATION
Output Voltage:
See Ratings Chart.
Output Current:
See Ratings Chart.
Output Connector:
V-M connector.
Output Wattage:
Typ. 40 watts.
Line Regulation:
Typ. 0.2-0.8%.
Load Regulation:
Main VO1 typ ±3%.
Aux. VO2 typ. ±3.8%.
Aux. VO3 typ. ±0.3%.
Noise & Ripple:
Typ. 1.0% peak to peak.
OVP:
Built-in at main output (Latch).
Adjustability:
Available at Main output.
Overload Protection (OLP):
Fully protected against outputs overload and short circuit.
Typ. OLP set at 125-150% of rating output power.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency:
Typ. 71%(Various with output voltage).
Switching Frequency:
45 KHz.
Circuit Topology:
Fixed frequency flyback circuit.
Transient Response:
Output voltage returns in less than
2mS following a 25% load change.
Safety Standard:
Meet Medical standards UL 2601-1/
EN 60601-1 Class I.
Operating Temperature:
-20 to +50 °C.
(Various with output voltage).
Storage Temperature:
-20 to +85°C.
Temperature Coefficient:
Typ. 0.04%/°C.
Cooling:
Free air convection.
Power Density:
2.18Watts / Cubic Inch.
Construction:
5”x3“ PCB format.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
-11-
HITRON [ HITRON ELECTRONICS CORPORTION ]
