H HiTRON
UNIVERSAL AC INPUT HARMONIC CORRECTION
AC-DC INDUSTRIAL DIN-RAIL SINGLE OUTPUT 60 WATTS
SWITCHING MODE POWER SUPPLIES HPD65 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC INPUT
MEET IEC 61000-3-2 HARMONIC
CORRECTION
MEET UNIVERSAL SAFETY STANDARDS
AND INDUSTRIAL UL 508
INDUSTRIAL POWER SUPPLIES FOR
SNAP-ON MOUNTING ON DIN-RAILS
EMI MEET EN 55022 CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage:
Typ. 90-264Vac universal AC input.
Input Connector:
M-T plug connector.
Input Frequency:
47-63Hz.
Inrush Current:
Typ. 15A @ 230Vac.
Input Current:
Typ. 0.7A @ 115Vac/0.38A @ 230Vac.
Dielectric Withstand:
Meet IEC 60950-1.
EMI:
Meet EN 55022/FCC Class B.
Power Factor Correction:
Meet Harmonic Correction
per IEC 61000-3-2.PF typ.0.93-0.99
No Load Operation:
No damage.
Hold-up Time:
Typ. 60mS @ 115Vac & 230Vac.
Earth Leakage:
Less than 0.70mA @ 230VAC.
OUTPUT SPECIFICATION
Output Voltage:
See Ratings Charts.
Output Current:
See Ratings Charts.
Output Wattage:
Typ. 60W continuous.
Output Connector:
M-T plug connector.
Line Regulation:
Typ. 0.1%.
Load Regulation:
Typ. ± 1.0-1.5%
Noise & Ripple:
Typ. 1% peak to peak.
OVP:
Built-in.(Latch).
Adjustment:
Available.
LED Indicator:
Installed.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
Typically set at 135% max. load.
Consult the factory for special OLP setting.
Operating Temperature:
-10 to +70°C.
Derating from +60 to +70°C by derating 2%/°C.
Storage Temperature:
-25 to +85°C.
Temperature Coefficient:
Typ. 0.03% /°C.
Cooling:
Free air convection cooling for Ta < +60°C.
Moving air is request for Ta >+ 60°C full load operation.
Construction format:
Enclosure metal box
with DIN-clips format.
GENERAL SPECIFICATION
Efficiency:
Typ. 75-78%.
Switching Frequency:
Fixed frequency 65.7KHz.
Circuit Topology:
Fixed freq. forward circuit.
Transient Response:
Peak transient about 95mV and
recovers within 12mS following 25% load change.
Safety Standard:
IEC 60950-1/UL 60950-1 Class I.
Power Density:
2.76Watts /Cubic Inch.
Industrial Grade UL 508.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
In application
-33-
HITRON [ HITRON ELECTRONICS CORPORTION ]
