H HiTRON
UNIVERSAL INPUT HARMONIC CORRECTION
AC-DC OPEN FRAME SINGLE & MULTI-OUTPUT 50-100 WATTS
INTERNAL SWITCHING POWER SUPPLIES HVP93 SERIES
FEATURES:
ACCOMMODATE UNIVERSAL AC SOURCES
MEET IEC 61000-3-2 HARMONIC
CORRECTION
MEET UNIVERSAL SAFETY STANDARDS
EMI MEET CISPR PUB. 22 CLASS B
CE MARKING COMPLIANCE
SPECIFICATION
INPUT SPECIFICATION
Input Voltage:
Typ. 90-264Vac with PFC.
Input Connector:
Molex V-M connector.
Input Frequency:
47-63Hz.
Inrush Current:
Typ. 23A @230Vac.
Input Current:
Typ. 1.5A@115Vac, 0.8A@230Vac.
Dielectric Withstand:
Meet IEC 60950-1.
EMI:
Meet CISPR PUB. 22 Class B.
Hold-up Time:
Typ. 43mS @ 115Vac & 230Vac.
Over Temp. Protection (OTP):
Optional for
U-Bracket format.
Power Factor Correction:
Meet Harmonic Correction
per IEC 61000-3-2.PF typ.0.98-0.99.
Earth Leakage:
Less than 0.63mA.
OUTPUT SPECIFICATION
Output Voltage:
See Ratings Chart.
Output Current:
See Ratings Chart.
Output Connector:
Molex V-M connector.
Output Wattage:
Typ. 50 Watts. Convection.
Max. 93 Watts under forced air flow.
Line Regulation:
Typ. 0.1-0.5%.
Load Regulation:
Main VO1: typ. ±1-2.0%.
Aux. VO2: typ. ±3-5.0%. (P.R.)
VO2: typ. ±2-3.0%. (P.R.)
Aux. VO3: typ. ±2-3.0%. (P.R.)
Noise & Ripple:
Typ. 1% peak to peak.
OVP:
Installed in main VO1 only.
Adjustability:
Available at main VO1.
OR-ing Diodes:
Installed in VO1 & VO2.
Overload Protection (OLP):
Fully protected against output overload and short circuit.
OLP set at about 125-150% rating output wattage.
Consult the factory for OLP setting.
GENERAL SPECIFICATION
Efficiency:
Typ. 75%.
Switching Frequency:
Fixed freq. at 65K Hz.
Circuit Topology:
PWM Fixed-frequency Forward Circuit.
Transient Response:
Output voltage returns in
less than 0.5mS following
a 25% load change.
Safety Standard:
UL 60950-1/EN 60950-1 Class I.
Power Density:
2.5-5.0 Watts / Cubic Inch PCB format.
1.7- 3.37 Watts / Cubic Inch U-Bracket format.
Operating Temperature:
0 to +50°C at full load and
30 cfm forced airflow for full load.
Storage Temperature:
-20 to +85°C.
Temperature Coefficient:
Typ. 0.04% /°C.
Cooling:
At least 20 cfm forced cooling air is required
for 90 watts and up load
Construction:
PCB or U-bracket open frame format.
Note: Due to requests in market and advances in technology, specifications subject to change without notification.
In application
-41-
HITRON [ HITRON ELECTRONICS CORPORTION ]
