HMC276QS24
/
276QS24E
v05.1105
GaAs MMIC 4x2 SWITCH
MATRIX, 0.7 - 3.0 GHz
Typical Applications
4x2 Switch Matrix for 0.7 - 3.0 GHz Applications:
•
Cable Modem
•
CATV
•
Cellular Systems
•
DBS
Features
Available as Lead Free
4x2 Switch Matrix Using One IC
4x4 Switch Matrix Using Two ICs
Integrated 4 Bit Decoder
Single Positive Supply: Vdd = +5V
8
SWITCHES - SMT
Functional Diagram
General Description
The HMC276QS24 & HMC276QS24E are low-cost
4x2 switch matrix in a 24-lead QSOP package for
use in RF multiplexing applications from 700 to 3000
MHz. A positive voltage controlled 4 bit decoder is
integrated on the switch. The switch may be used in
either 75 ohm or 50 ohm systems.
Both switch outputs (OP1 & OP2) can independently
select any of the four inputs (HH, HL, VH, VL) or simul-
taneously select the same inputs. Note that the switch
is bi-directional and input/output functionality may be
interchanged. The recommended loading impedance
is 62.5 ohms on each input (HH, HL, VH, VL) and
75 ohms on each output (OP1 & OP2). All data pre-
sented was measured in a 50 ohm (input/output)
system.
Electrical Specifications,
T
A
= +25° C, Vdd= +5V, 50 Ohm System
Parameter
Insertion Loss
Frequency
700 - 3000 MHz
700 - 950 MHz
950 - 1450 MHz
1450 - 2150 MHz
2150 - 3000 MHz
700 - 3000 MHz
700 - 3000 MHz
700 - 3000 MHz
700 - 3000 MHz
tRISE / tFALL (10/90% RF)
tON / tOFF (50% CTL to 10/90% RF)
700 - 3000 MHz
Min.
Typ.
6.0
Max.
7.0
Units
dB
dB
dB
dB
dB
dB
dB
dBm
dBm
ns
ns
Isolation
36
40
See OP1/2 Isolation Tables
32
36
26
31
12
11
31
22
16
15
37
26
140
350
Return Loss (Input; VL, HL, VH, HH)
Return Loss (Output; OP1, OP2)
Output IP3
Input Power for 1 dB Compression
Switching Speed
8 - 146
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com