HT48E10
I/O Type 8-Bit MTP MCU With EEPROM
Technical Document
·
·
·
-
-
-
-
Features
·
Operating voltage:
·
Buzzer driving pair and PFD supported
·
HALT function and wake-up feature reduce power
f
SYS
=4MHz: 2.2V~5.5V
f
SYS
=8MHz: 3.3V~5.5V
·
Low voltage reset function
·
19 bidirectional I/O lines (max.)
·
Interrupt input shared with an I/O line
·
8-bit programmable timer/event counter with overflow
consumption
·
4-level subroutine nesting
·
Up to 0.5ms instruction cycle with 8MHz system clock
at V
DD
=5V
·
Bit manipulation instruction
·
14-bit table read instruction
·
63 powerful instructions
·
10
6
erase/write cycles EEPROM data memory
·
EEPROM data retention > 10 years
·
All instructions in one or two machine cycles
·
In system programming (ISP)
·
24-pin SKDIP/SOP package
interrupt and 8-stage prescaler
·
On-chip crystal and RC oscillator
·
Watchdog Timer
·
1,000 erase/write cycles MTP program memory
·
1024´14 program memory ROM (MTP)
·
128´8 data memory EEPROM
·
64´8 data memory RAM
General Description
The HT48E10 is an 8-bit high performance, RISC archi-
tecture microcontroller device specifically designed for
multiple I/O control product applications.
The advantages of low power consumption, I/O flexibil-
ity, timer functions, oscillator options, HALT and
wake-up functions, watchdog timer, buzzer driver, as
well as low cost, enhance the versatility of these devices
to suit a wide range of application possibilities such as
industrial control, consumer products, subsystem con-
trollers, etc.
Rev. 1.50
1
October 31, 2006