L6713A
Table 1. Pin description
N°
Pin
Function
Pin settings
56
VCCDR2
Channel 2 LS Driver Supply.
It must be connected to others VCCDRx pins also when using 2-Phase
Operation.
LS Driver supply can range from 5Vbus up to 12Vbus, filter with 1µF MLCC cap
vs. PGND2.
Channel 3 LS Driver Supply.
It must be connected to others VCCDRx pins.
LS Driver supply can range from 5Vbus up to 12Vbus, filter with 1µF MLCC cap
vs. PGND3.
Channel 3 LS Driver Output.A small series resistor helps in reducing device-
dissipated power.
Channel 3 LS Driver return path. Connect to Power ground Plane.
Channel 1 LS Driver return path. Connect to Power ground Plane.
Channel 1 LS Driver Output.A small series resistor helps in reducing device-
dissipated power.
Channel 1 LS Driver Supply.
It must be connected to others VCCDRx pins.
LS Driver supply can range from 5Vbus up to 12Vbus, filter with 1µF MLCC cap
vs. PGND1.
Channel 1 HS driver return path.
It must be connected to the HS1 MOSFET source and provides return path for
the HS driver of channel 1.
Not internally connected.
Thermal pad connects the Silicon substrate and makes good thermal contact
with the PCB to dissipate the power necessary to drive the external MOSFETs.
Connect to the PGND plane with several VIAs to improve thermal conductivity.
57
VCCDR3
58
59
60
61
LGATE3
PGND3
PGND1
LGATE1
62
VCCDR1
63
64
PAD
PHASE1
N.C.
THERMAL
PAD
11/64