Limit and Enclosed Switches
Weather-Sealed Explosion-Proof Switches
80CX SWITCHES ALSO WITHSTAND
CORROSIVE ENVIRONMENTS
80CX switches have rugged bronze hous-
ings which are resistant to salt water and
other corrosive environments. They comply
with the NEMA 4X requirement for protec-
tion against corrosion, in addition to NEMA
enclosure standards met by other CX
switches. O-ring seals make the enclosure
weather-proof, but are outside of required
flame paths so explosion-proof require-
ments are maintained.
CX Series
STAINLESS STEEL LEVER ACTUATORS
These levers match the corrosion resistance of the 80CX housing. Non-sparking rollers
must be used in hazardous locations.
ORDER GUIDE STAINLESS STEEL LEVERS WITH NYLON ROLLERS
Std. Roller Lever
Radius (In.)
1.5
Std. Lever w/o roller
Adjustable Radius
1.5
1.5-3.5
Dia. In.
.75
.75
.75
Width In.
.25
.25
.25
Catalog Listing
LS2Z51A
LS2Z51
LS2Z52A
Limit/Enclosed
Note: Refer to page A36 for lever dimensions.
ROTARY ACTUATED SWITCHES
ORDER GUIDE
As factory assembled, all basic switches
operate on clockwise or counterclockwise
rotation. Actuating mechanism can be field
adjusted for CW or CCW operation only. No
tools are required.
Catalog Listings
Shaft Restoring
Force To Center
Description
1
15 amp. SPDT
With
81CX1
81CX2
81CX4
82CX2
82CX4
84CX2
Without
2
81CX11
81CX12
81CX14
82CX12
82CX14
84CX12
Housing
Size
Standard
Standard
Standard
Standard
Standard
Standard
Basic
Switch(es)
BZ(1)
BZ(2)
BZ(4)
BA(2)
BA(4)
DT(2)
Electrical
Ratings
Page A109
A
A
A
B
B
C
80CX switches available with standard
housing only.
Actuators are not included with switches.
Order them separately.
MOUNTING HOLES
Add the letter A to listings with side
mounting holes tapped 5/16-18(8).
Example: 82CX2A
Add the letter B to listings with thru
mounting holes tapped 3/8-24(4).
Example: 81CX2B.
20 amp. SPDT
Also UL listed for Class I,
Group B (hydrogen
atmospheres). 10 amp. DPDT
Notes: Refer to page A127.
MODIFIED SHAFT ENABLES
DIRECT COUPLING
CX switches are available with a
3
⁄
8
inch
diameter by
3
⁄
4
inch long flatted shaft which
conforms to standard NEMA motor shaft
specifications. It accepts commercially
available shaft couplers, permitting easy,
direct coupling to most equipment actua-
tors.
To specify a ‘‘direct-couple’’ CX switch, add
-DO1
to catalog listings shown in the order
guides, i.e. 11CX12-DO1. Pricing is the same
as for unmodified versions.
MOUNTING BRACKET
An aluminum mounting bracket is available
for adapting CX switches to existing 2-hole
mounting arrangements.
CX.
To order, specify Catalog Listing
15PA148-
15PA148-CX
Flatted
Shaft
Version
Honeywell
Sensing and Control 1-800-537-6945 USA
1-815-235-6847 International 1-800-737-3360 Canada
A129
HONEYWELL-ACC [ HONEYWELL ACCELEROMETERS ]
