Stainless Steel Pressure Sensors
ST Series
SPECIFICATIONS
Pressure Ranges
1
psig 0 to 5.0, 10.0, 15.0, 25.0, 50.0, 100, 150, 200, and 250
bar 0 to 0.4, 0.6, 1.0, 1.6, 2.5, 4.0, 6.0, 10.0, and 16.0
Physical
Proof Pressure
≤150
psi [6.0 bar], 3 X rated range
>150
psi [6.0 bar], 2 X rated range
Burst Pressure
≤100
psi [6.0 bar], 5 X rated range
>100
psi [6.0 bar], 3 X rated range
Material in contact with
300 series stainless steel or brass, internal seal, silicon, polyetherimide
media
Weight
2.0 oz [57.0 gm]
2
Environmental
Shock
50 g’s peak [5 milliseconds]
Vibration
Figure 514.2-5, Curve AK, Table 514.2-V, Random Vibration Test [Overall g
rms = 20.7 minimum]
3
Electrical
Voltage
Current
Null Offset
0.5 Vdc
4.0 MA
Span
4.0 Vdc [0.50 Vdc to 4.50 Vdc]
16 mA [4 mA to 20 mA]
Excitation Ratiometric
5.0 Vdc
±250
mV [7.0 Vdc max.] 9.5 Vdc to 35.0 Vdc
Regulated
7.0 Vdc to 35.0 Vdc
Supply Current
5.0 mA typical [7.0 mA max.]
N/A
Source (nominal)
2.0 mA
N/A
Sink (nominal)
20 µA @ zero output
N/A
Supply Rejection Ratio
90 decibels
N/A
Output Impedance
N/A
25
Ω
max.
3
Performance
Response Time
<
500 µs
EMI/RFI
Exceeds CE heavy industrial
[30v/m radiated 150 kHz to 1 gHz]
Electrical Connection
Packard Metri-Pack
TM
requires mating connector P/N3685901 (order
separately)
Accuracy
±1.0% F.S.O. best fit straight line includes: non-linearity, hysteresis, non-
repeatability. Thermal errors are not included.
Total Error Band
±2% F.S.O. Includes: zero offset error, span error, thermal effect on zero and
thermal effect on span, non-linearity, hysteresis, non-repeatability
Compensated Operating and
Range -40 °C to 100 °C [-40 °F to 212 °F]
Storage Temperature Range
Notes:
1.
Contact the factory to discuss other pressure ranges.
2.
Meets IEC-68-2 or MIL-STD 810C.
3.
All specifications are measured at 25 °C [77 °F] and at rated excitation unless otherwise specified.
2 Honeywell
•
Sensing and Control
HONEYWELL [ HONEYWELL SOLID STATE ELECTRONICS CENTER ]
