RFM01-868-S1 参数 Datasheet PDF下载

RFM01

Datasheet REV1.2

ISM BAND FSK RECEIVER MODULE

RFM01

（the

purpose of this spec covers mainly for the physical

characteristic of the module, for register configure and its

related command info please refer to

RFM01

General Introduction

RFM01 is a low costing ISM band receiver module

implemented with unique PLL and zero IF design approach.

It works with FSK modulated signal ranges from

315/433/868/915MHZ bands, comply with FCC, ETSI

regulation. The SPI interface is used to communicate with

microcontroller for parameter setting. RFM01 works with

RFM02 transmitter module. At 433MHZ band, the pair of

module can work up to 300m in the free open air.

Features:

• Low costing, high performance and price ratio

• Tuning free during production

• FSK reception

• PLL and zero IF technology

• Fast PLL lock time

• High resolution PLL with 2.5 KHz step

• High data rate (up to 115.2 kbps with internal demodulator，with external RC filter highest data rate is

256 kbps)

• Differential antenna input

• Automatic antenna tuning

• Programmable receiver bandwidth (from 67 to 400 kHz)

• Analog and digital signal strength indicator (ARSSI/DRSSI)

• AFC

• DQD

• Internal demodulator

• SPI interface

• Clock and reset signal output for external MCU use

• 16 bits FIFO

• Low power mode (<0.5mA averaged current consumption)

• 10MHz crystal for PLL timing

• Wakeup timer

• Low battery detection

• Programmable capacitor bank

• 2.2V - 5.4V power supply

• Low power consumption

• Stand by current less than 0.3uA

Tel: +86-755-82973805 Fax: +86-755-82973550

E-mail: sales@hoperf.com http://www.hoperf.com