RFM12B 参数 Datasheet PDF下载

RFM12B

Datasheet REV1.2

UNIVERSAL ISM BAND FSK TRANSCEIVER MODULE

RFM12B

（the

purpose of this spec covers mainly for the

physical characteristic of the module, for register

configure and its related command info please refer

to

RFM12B

General Introduction

RFM12B is a low costing ISM band transceiver

module implemented with unique PLL. It works

signal ranges from 433/868/915MHZ bands, comply

with FCC, ETSI regulation. The SPI interface is

used to communicate with microcontroller for

parameter setting.

Features:

• Low costing, high performance and price ratio

• Tuning free during production

• PLL and zero IF technology

• Fast PLL lock time

• High resolution PLL with 2.5 KHz step

• High data rate (up to 115.2 kbps with internal demodulator，with external RC filter highest data rate is

256 kbps)

• Differential antenna input/output

• Automatic antenna tuning

• Programmable TX frequency deviation (from 15 to 240 KHz)

• Programmable receiver bandwidth (from 67 to 400 kHz)

• Analog and digital signal strength indicator (ARSSI/DRSSI)

• Automatic frequency control (AFC)

• Data quality detection (DQD)

• Internal data filtering and clock recovery

• RX synchron pattern recognition

• SPI compatible serial control interface

• Clock and reset signal output for external MCU use

• 16 bit RX Data FIFO

• Two 8 bit TX data registers

• Standard 10 MHz crystal reference

• Wakeup timer

• 2.2V – 3.8V power supply

• Low power consumption

• Standby current less than 0.3uA

• Supports very short packets (down to 3 bytes)

Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com

http://www.hoperf.com