Board Layout - Art Work
The Applications Engineering
group has developed Gerber
file artwork for a multilayer
printed circuit board layout
incorporating the recommenda-
tions above. Contact your local
Agilent sales representative for
details.
Board Layout - Mechanical
For applications interested in
providing a choice of either a
duplex SC or a duplex ST
connector interface, while
utilizing the same pinout on
the printed circuit board, the
ST port needs to protrude
from the chassis panel a
minimum of 9.53 mm for
sufficient clearance to install
the ST connector.
Please refer to Figure 8a for a
mechanical layout detailing the
recommended location of the
duplex SC and duplex ST
transceiver packages in
relation to the chassis panel.
9.53
(NOTE 1)
12.0
0.51
12.09
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
;;
42.0
24.8
25.4
11.1
6.79
0.75
39.12
25.4
;;
;;
;;
;;
NOTE 1: MINIMUM DISTANCE FROM FRONT
;;
OF CONNECTOR TO THE PANEL FACE.
;;
;;
Figure 8a. Recommended Common Mechanical Layout for SC and ST 1 x 9 Connectored
Transceivers.
20.32
(0.800)
2 x Ø 1.9 ± 0.1
(0.075 ± 0.004)
20.32
(0.800)
9 x Ø 0.8 ± 0.1
(0.032 ± 0.004)
2.54
(0.100)
TOP VIEW
DIMENSIONS ARE IN MILLIMETERS (INCHES)
Figure 8. Recommended Board Layout Hole Pattern
8
HP [ AGILENT(HEWLETT-PACKARD) ]
