2mm Pitch Miniature Connector for HDD
A3E Series
sFeatures
1. Variation in Number of Contacts
This connector can be chosen according to applications, using
together with other series products as follows:
(1) Cable crimping type (A3B series)
(2) Cable ID type (A3E series)
(3) FFC connection type (MA18 series, A3C series)
(However, the A3E series pin header corresponds to the A3E
series socket only.)
On the other hand, 44 contacts are available for AT bus
connection, and 55 contacts for SCSI connection.
2. Batch Insulation Displacement
1 mm pitch ribbon cable can be insulated and displaced.
type without polarizing guide
3. Mechanism to Prevent Mis-insertion
The connector on the socket side contains a mechanism to
prevent mis-insertion in the connector on the header side.
type with polarizing guide
sProduct
Specifications
Rating
Current rating: 0.5A
Voltage rating: 125V AC
Operating Temperature Range:-55 to +85ç (Note 1) Storage Temperature Range:-10 to +60ç (Note 2)
Operating Moisture Range:40 to 80%
Storage Humidity Range:40 to 70% (Note 2)
Condition
250V DC
300V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40ç and humidity of 90% to 95%
(-65ç: 30 minutes
¡15
to 35ç: 5 minutes max.¡
(-125ç:
30 minutes
¡15
to 35ç: 5 minutes max.) 5 cycles
100 cycles
Flow: 260ç for 10 seconds
Manual soldering: 300ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Item
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
1000M ohms min.
Specification
No flashover or insulation breakdown.
40m ohms max.
No electrical discontinuity of 1µs or more
5. Humidity (Steady state) Insulation resistance: 1000M ohms min.
6. Temperature Cycle
No damage, cracks, or parts looseness.
7.
Durability (Mating/un-mating)
Contact resistance: 50m ohms max.
8.
Resistance to Soldering heat
No deformation of components affecting performance.
sMaterial
Part
Insulator
Contact
Pin header
Socket
Pin header
Socket
Material
Polyamid
PBT
Brass
Beryllium copper
Selective gold plated
Gold plated
–––––––
Finish
Black
Remarks
UL94V-0
C26
HRS [ HIROSE ELECTRIC ]
