BConnector
Operating Instructions, precautions and recommendations
Operation
Precautions
1) Do not apply excessive force or use any type of
tool to operate the actuator.
1.FPC Termination procedure. Connector
installed on the board.
1) Lift up the actuator. Use thumb or index finger.
2) Rotate down the actuator until firmly closed.
It is critical that the inserted FPC is not moved and
remains fully inserted. Should the FPC be moved,
open the actuator and repeat the process, starting
with Step 1 above.
2)
The connector will assure reliable performance
when the actuator is open to 130° maximum (see
fig.1) Do not exceed this angle, as this may cause
permanent damage to the connector.
Fig.1
90ç
2.FPC Removal
1) Lift up the actuator.
2) Carefully remove the FPC.
3) Assure that the FPC/FFC is fully inserted parallel
to mounting surface, with the exposed conductive
traces facing down.
FPC conductive traces
49