Coil Components (SMD)
MC-200SC and MC-200SD Series
s
Features
1.Excellent High Frequency Characteristics
Insertion loss: 0.6 dB TYP.
Phase balance:
±3deg
TYP.
MC-201SC
MC-212SC
MC-217SC
MC-218SC
2.Highly Reliable Design
PPS resin is used for the exterior cladding of the
cover, glass epoxy substrate is used for the board
material, and solder plating is used for the electrodes.
All these factors contribute to excellent mechanical
strength, heat resistance, and soldering qualities
MC-201SD
MC-211SD
MC-212SD
MC-213SD
3.Suited to Automatic Mounting
Embossed tape packaging permits automatic mounting.
(Individual delivery can also be accommodated.)
s
Product Specifications
Ratings
Frequency range (Note)
Characteristic impedance (Note)
Maximum Input Power
Item
1.Vibration
2.Shock
3.Temperature cycle
4.Corrosion resistance
No serious corrosion
No damage, cracks, or parts dislocation
30 to 370 MHz
50
ohms,
75
ohms
0.5 W
Standard
Operating temperature range
Operating relative humidity
-10
ç
to +65
ç
95% Max.
Note: The frequency range and the characteristic impedance will differ depending on the products.
Conditions
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s
2
for 4 hours in each of 3 directions
Acceleration of 294 m/s
2
, sine half-wave waveform, 3 cycles in each of the 3 axis
(-60 to 55
ç
: 30 min.
¡
20 to 35
ç
: 15 min.
¡
125 to 128
ç
: 30 min.
¡
20 to 35
ç
: 15 min.)
for 100 cycles
Exposed to 5% salt water solution for 48 hours
q
The test method conforms to MIL-STD-202.
s
Materials
Part
Board
Cover
s
External Dimensions
Material
Glass epoxy
PPS
Finish
Solder plating
-----------
s
Ordering Information
MC - 2 0 1 S C
1
2 3 4 5
6
input
1
Series Name: MC
2
Number of Divisions
Indicated by number of divisions of output.
4
Suffix
5
Board Mounting Method
S : SMT type
3
Phase Difference
Indicated by phase difference of output.
0 : 0°
1 : 90°
6
Characteristic Impedance
C : 75
ohms
D : 50
ohms
q
The contact numbers
are common for both the
0° type and the 90° type.
46