TECHNICAL
DATA
4
QUALIFICATION PROCESS
HTS2030SMD sensors have been qualified through a complete qualification process taking in account
many of the requirements of the JEDEC standard including:
•
•
Solder heat and solderability including
lead free process.
Pb free wave soldering and reflow
soldering process(260°C) + DI water
clean at 45°C
Mechanical shock JESD-22-B104-A
Vibration - Variable frequency(20 to
2000Hz) JESD-22-B103-A
•
•
•
•
•
High Temperature / Humidity Operating
Life - 93%RH / 60°C for 1000 hours
Low Humidity storage life - RH <
10%/23°C - 1000 hours
Resistance to immersion in water at
ambient temperature and 80°C
High temperature storage 140°C for 168
hours.
•
•
•
•
Marking permanency
ESD - Electrostatic Discharge –Air Gun
+-15kV(IEC 1000)
Resistance to many chemicals linked to
home appliances/automotive or
consumer applications.
•
•
Salt Atmosphere JESD22-A107-A
Temperature Cycling - 40°C / +125°C
ENVIRONMENTAL AND RECYCLING
HTS2030SMD sensors are lead free components and are compatible with Pb Free soldering
processes.HTS2030SMD sensors are free from Cr (6+), Cd and Hg.
SOLDERING INSTRUCTIONS
See Application Note. To get it, please contact: application@humirel.com
PACKAGE OUTLINE HTS2030SMD GULL WING (JLEAD option also available)
Dimensions in millimeters
FOOTPRINT
ORDERING INFORMATION of HTS2030SMD:
•
•
HPP804B130: TUBE M.P.Q. OF 78 PIECES.
HPP804B131: TAPE AND REEL M.P.Q. OF 1500 PIECES.
TEMPERATURE AND RELATIVE HUMIDITY SENSORS.
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsability is assumed for inaccuracies. Furthermore, this information does not convey to the purchaser of such devices any license under the patent
rights to the manufacturer. Humirel reserves the right to make changes without further notice to any product herein. Humirel makes no warranty, representation or guarantee regarding the suitability of its product for any particular purpose, nor does Humirel
assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. « Typical » parameters can and do vary in different applications.
All operating parameters, including « Typical » must be validated for each customer applications by customer’s technical experts. Humirel does not convey any license under its patent rights nor the rights of others. Humirel products are not designed,
intended, or authorized for use as components in systems intended for surgical implant into the body, or other application intended to support or sustain life, or for any application in which the failure of the Humirel product could create a situation where
personal injury or death may occur. Should buyer purchase or use Humirel products for any such unintended or unauthorized application, Buyer shall indemnify and hold Humirel and its officers, employees, subsidaries, affiliates and distributors
harmless against all claims, costs, damages and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of presonal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Humirel
was negligent regarding the design or manufacture of the part.Humirel is a registred trade mark of Humirel.
HUMIREL HPC055 Rev0 June 2004
HTS2030SMD
HUMIREL [ Humirel ]
