2192 Series
H
IGH
V
OLTAGE
P
OWER
S
UPPLIES
FEATURES
NEMA 1, Metal Enclosure
Cost Effective
Reliable Solid State Design
Maintenance Free
Automatic Over Current Shutdown and Recovery
High Frequency Switchmode Design
HV Meter on Front Panel to Monitor Output
(voltage and current)
High Load Current Alarm Contacts
Shutdown (overload) Alarm Contacts
RoHS Version Available
Formerly CS2192 series
TYPICAL APPLICATIONS
Electrostatic Paint Spray
Electrostatic Seasoning Application
Electrostatic Oil Spray
TYPICAL ELECTRICAL
SPECIFICATIONS
Input Voltage: 120 VAC (± 10%) 50/60 Hz
Output Voltage: -60 to -90 kVDC Adjustable
Output Current: 175 µA Max
Output Power: 15 W
Output Regulation: Regulated, see Typical V-I
Curve
Load: May be operated into any load condition
(capacitive, resistive or inductive) or no load.
Can withstand arcing and short circuits.
Isolated Output; High Voltage referenced to
Earth Ground
DESCRIPTION
The 2192 series of regulated solid state switching
power supplies is designed for applications
requiring a high voltage power supply. Input
Voltage: 120 VAC (± 10%) 50 / 60 Hz.
The 2192 series is packaged in a NEMA1 metal,
enclosure and may be installed in any position.
High Voltage Silicone grease is shipped in the high
voltage connectors. Consult factory for additional
information.
TYPICAL MECHANICAL
SPECIFICATIONS
Relay / Input Termination: Terminal strip
located externally on enclosure
High Voltage Termination: Tubular connections
with integral strain relief seals, external to the
metal case
Enclosure: NEMA1 metal with hinged cover and
knockouts
Temperature Rating:
Operating 0º to +60ºC
Storage -40º to +85ºC
NOTICE: This power supply requires adequate
ground connection for operation. Failure to
provide ground could result in failure of the
power supply.
3227 Skylane Drive
Carrollton, TX 75006
972-248-7691
www.hvpsi.com
Rev. 4
Specifications subject to change without prior notification
HVPSI [ HIGH VOLTAGE POWER SOLUTIONS, INC. ]
