MB3U, MB3U-I2C
BiSS TO PC-USB ADAPTER
Rev B2, Page 1/7
ORDERING INFORMATION
Type
PC Adpater
Order Designation
iC-MB3 iCSY MB3U
iC-MB3 iCSY MB3U-I2C
iC-MB3 iCSY MB3U-PS230
Description Options
BiSS
to PC-USB Adapter
BiSS
and I2C to PC-USB Adapter
BiSS
to PC-USB Adapter
including wall power supply
(230VAC to 12 V; 400 mA)
iC-MB3 iCSY MB3U-I2C-PS230
BiSS
and I2C to PC-USB Adapter
including wall power supply
(230VAC to 12 V; 400 mA)
Software
BiSS
GUI
MB3U USB DRIVER
GUI software for Windows PC
communication to
BiSS
PC Adapter
USB device driver
(Windows ME/2000/XP/Vista - ready)
please see
for download information
Scope of delivery: USB AB cable (1 m)
DESCRIPTION
The
BiSS
to PC-USB Adapter enables
BiSS
or SSI
sensors to be connected to a PC easily and at low
cost. The USB port supplies the adapter as well as
the connected sensor, for which the 5V (up to 50 mA,
through Pin 4)* and 12 V (up to 90 mA, through Pin 1)*
as galvanically isolated voltages are available. An ex-
ternal wall power supply can also be connected to de-
liver other voltages or higher currents. The
BiSS/SSI
communication is accomplished by differential RS422
wires with separate potentials and cycle rates of up to
10 Mbit/sec.
USB-B Plug
4-pole
size approx.
42 x 95 x 24 mm
Power Supply Socket
2-pole, 6.6/1.9 mm
DIN 45323
Technical Data
BiSS
Interface
• Synchronously triggered measurement data collec-
tion from up to 3
BiSS
sensors or one SSI encoder
•
BiSS
data rates up to 10 Mbit/sec., SSI up to
4 Mbit/sec.
• Protocol compatible with
BiSS
Master iC-MB3z
• USB 2.0 compatible
• Galvanic encoder signal isolation
• Galvanically isolated sensor supply sourced from the
USB port (+12 V / 90 mA, +5 V / 50 mA)*
• Plug-in power supply can be connected for sensors
with higher power needs
BiSS Plug
9-pole SUB-D
1
6
5
9
BiSS Plug
9-pole SUB-D
Figure 1: iC-MB3 iCSY MB3U
* 100 mA for +5 V and +12 V available starting from 2008
Copyright © 2010 iC-Haus
ICHAUS [ IC-HAUS GMBH ]
