TECHNICAL DATA
5-V Low-Drop Voltage Regulator
ILE4267
ILE 4267 is a 5-V low-drop voltage regulator in a
TO220-7 package. It supplies an output current of > 400
mA. The IC is shortcircuit-proof and incorporates
temperature protection that disables the IC at
overtemperature.
Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Output voltage tolerance
≤
± 2 %
400 mA output current capability
Low-drop voltage
Very low standby current consumption
Input voltage up to 40 V
Overvoltage protection up to 60 V (≤ 400 ms)
Reset function down to 1 V output voltage
ESD protection up to 2000 V
Adjustable reset time
On/off logic
Overtemperature protection
Reverse polarity protection
Short-circuit proof
Wide temperature range
Suitable for use in automotive electronics
Application
The IC regulates an input voltage
V,
in the range 5.5 V < Vi
<
40 V to V
Qrated
= 5.0 V. A
reset signal is generated for an output voltage V
Q
of < 4.5 V. The reset delay can be set
with an external capacitor. The device has two logic inputs. It is turned-ON by a voltage of
> 4 V on E2 by the ignition for example. It remains active as a function of the voltage on
E6, even if the voltage on E2 goes Low. This makes it possible to implement a self-holding
circuit without external components. When the device is turned-OFF, the output voltage
drops to 0 V and current consumption tends towards 0
µ
A
.
Design Notes for External Components
The input capacitor Ci is necessary for compensation line influences. The resonant circuit
consisting of lead inductance and input capacitance can be damped by a resistor of
approx. 1
Ω
in series with Ci. The output capacitor is necessary for the stability of the
regulating circuit. Stability is guaranteed at values of
≥
22
µF
and an ESR of
≤
3
Ω
within
the operating temperature range.
1