TECHNICAL DATA
IN74AC192
Presettable BCD/Decade UP/DOWN Counter
High-Speed Silicon-Gate CMOS
The IN74AC192 is identical in pinout to the LS/ALS192,
HC/HCT192. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS outputs.
The counter has two separate clock inputs, a Count Up Clock and
Count Down Clock inputs. The direction of counting is determined by
which input is clocked. The outputs change state synchronous with the
LOW-to-HIGH transitions on the clock inputs. This counter may be
preset by entering the desired data on the P0, P1, P2, P3 input. When the
Parallel Load input is taken low the data is loaded independently of either
clock input. This feature allows the counters to be used as devide-by-n by
modifying the count lenght with the preset inputs. In addition the counter
can also be cleared. This is accomplished by inputting a high on the
Master Reset input. All 4 internal stages are set to low independently of
either clock input.Both a Terminal Count Down (TC
D
) and Terminal
Count Up (TC
U
) Outputs are provided to enable cascading of both up and
down counting functions. The TC
D
output produces a negative going
pulse when the counter underflows and TC
U
outputs a pulse when the
counter overflows. The counter can be cascaded by connecting the TC
U
and TC
D
outputs of one device to the Count Up Clock and Count Down
Clock inputs, respectively, of the next device.
•
Outputs Directly Interface to CMOS, NMOS, and TTL
•
Operating Voltage Range: 2.0 to 6.0 V
•
Low Input Current: 1.0
μA,
0.1
μA
@ 25°C
•
High Noise Immunity Characteristic of CMOS Devices
•
Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74AC192N Plastic
IN74AC192D SOIC
T
A
= -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 16 =V
CC
PIN 8 = GND
Rev. 00
IKSEMICON [ IK SEMICON CO., LTD ]
