TECHNICAL DATA
Octal 3-State
Inverting D Flip-Flop
High-Speed Silicon-Gate CMOS
The IN74AC534 is identical in pinout to the LS/ALS534,
HC/HCT534. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS outputs.
Data meeting the setup time is clocked, in inverted form, to the
outputs with the rising edge of the Clock. The Output Enable input does
not affect the states of the flip-flops, but when Output Enable is high, the
outputs are forced to the high impedance state. Thus, data may be stored
even when the outputs are not enabled.
•
Outputs Directly Interface to CMOS, NMOS, and TTL
•
Operating Voltage Range: 2.0 to 6.0 V
•
Low Input Current: 1.0
μA;
0.1
μA
@ 25°C
•
High Noise Immunity Characteristic of CMOS Devices
•
Outputs Source/Sink 24 mA
IN74AC534
ORDERING INFORMATION
IN74AC534N Plastic
IN74AC534DW SOIC
T
A
= -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Inputs
Output
Enable
L
L
L
PIN 20=V
CC
PIN 10 = GND
H
L,H,
X
Clock
D
H
L
X
X
Output
Q
L
H
no
change
Z
X = don’t care
Z = high impedance
Rev. 00