IW4053B
MAXIMUM RATINGS*
Symbol
Parameter
Value
-0.5 to +20
-0.5 to VCC +0.5
10
Unit
V
VCC
VIN
IIN
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
DC Input Current, per Pin
V
mA
mW
mW
°C
PD
Power Dissipation in Still Air
500*1
Ptot
Tstg
TL
Power Dissipation per Output Transistor
Storage Temperature
100
-65 to +150
260
Lead Temperature, 1 mm from Case for 10 Seconds
(Plastic DIP or SO Package)
°C
*Maximum Ratings are those values beyond which damage to the device may occur.
Functional operation should be restricted to the Recommended Operating Conditions.
*1 - for Plastic DIP from -55° to +100°C, for SO Package from -55° to +65°C.
+Derating - Plastic DIP: - 12 mW/°C from 100° to 125°C
SO Package: - 7 mW/°C from 65° to 125°C
RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
Parameter
DC Supply Voltage (Referenced to GND)
DC Input Voltage (Referenced to GND)
Operating Temperature, All Package Types
Min
3.0
0
Max
18
Unit
V
VIN
VCC
+125
V
TA
-55
°C
This device contains protection circuitry to guard against damage due to high static voltages or electric fields.
However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this
high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND≤(VIN or
V
OUT)≤VCC.
Unused digital pins must be tied to an appropriate logic voltage level (e.g., either GND or VCC). Unused
Analog I/O pins may be left open or terminated.
2