1-A Dual-HBD (Dual-Half-Bridge Driver)
TLE4207G
Features
• Delivers up to 0.8 A continuous
• Optimized for DC motor management applications
• Very low current consumption
in stand-by (Inhibit) mode
• Low saturation voltage
;
typ.1.2 V total @ 25
°C;
0.4 A
• Output protected against short circuit
• Error flag diagnosis
• Overvoltage lockout and diagnosis
• Undervoltage lockout
• CMOS/TTL compatible inputs with hysteresis
• No crossover current
• Internal clamp diodes
• Overtemperature protection with hysteresis
and diagnosis
• Enhanced power PG-DSO-Package
• Green Product (RoHS compliant)
• AEC Qualified
Type
TLE4207G
Description
The TLE4207G is a protected
Dual-Half-Bridge-Driver
designed specially for automotive
and industrial motion control applications.
The part is built using the Infineon bipolar high voltage power technology DOPL.
The actuator (DC motor) can be connected direct between the halfbridges. Operation
modes forward (cw), reverse (ccw), brake and high impedance are invoked from a
standard interface. The standard enhanced power PG-DSO-14-22 package meets the
application requirements and saves PCB-board space and costs.
Furthermore the built in features like diagnosis, over- and undervoltage-lockout, short-
circuit-protection, over-temperature-protection and the very low quiescent current in
stand-by mode will open a wide range of automotive and industrial applications.
Ordering Code
on request
PG-DSO-14-22
Package
PG-DSO-14-22
Data Sheet
1
Rev. 1.1, 2008-01-08
INFINEON [ INFINEON TECHNOLOGIES AG ]
