CAN-Transceiver
TLE 6250
TLE 6250 V33
Final Data Sheet
Features
• CAN data transmission rate up to 1 MBaud
• Suitable for 12 V and 24 V applications
• Excellent EMC performance (very high immunity and
very low emission)
• Version for 5 V and 3.3 V micro controllers
• Bus pins are short circuit proof to ground and battery
voltage
• Over-temperature protection
• Very wide temperature range (- 40°C up to 150°C)
Type
TLE 6250 G
TLE 6250 C
TLE 6250 G V33
TLE 6250 C V33
Description
The CAN-transceiver TLE 6250 is a monolithic integrated circuit that is available as bare
die as well as in a P-DSO-8-3 package. The IC is optimized for high speed differential
mode data transmission in automotive and industrial applications and is compatible to
ISO/DIS 11898 (see page 12 and 20). It works as an interface between the CAN protocol
controller and the physical differential bus in both, 12 V and 24 V systems.
Note:
There are two versions available: one for 5 V logic and the other one for 3.3 V logic
requiring additional supply via the V
33V
pin. The IC can be set to stand-by mode via an
control input. In addition the 5 V-version offers a receive only mode feature to support
diagnostic functions.
The IC is based on the
Smart Power Technology
SPT
which allows bipolar and CMOS
control circuitry in accordance with DMOS power devices existing on the same
monolithic circuit. The TLE 6250 is designed to withstand the severe conditions of
automotive applications and provides excellent EMC performance.
Ordering Code
Q67006-A9427
Q67000-A9594
Q67006-A9523
Q67000-A9538
P-DSO-8-3
Package
P-DSO-8-3
(chip)
P-DSO-8-3
(chip)
Data Sheet Version 3.4
1
2002-10-08
INFINEON [ INFINEON TECHNOLOGIES AG ]
