Single Wire CAN-Transceiver
Final Data Sheet
1
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Features
Single wire transceiver for up to 33 kBit/s bus speed
Compatibel to GM LAN Standard GMW 3089 - V1.26
Excellent EMC performance
High speed mode for up to 100 kBit/s bus speed
Ambient operation range
–
40
°C
to 125
°C
Supply voltage operation range 5.5 V to 28 V
Typ. 30
µA
total current consumption in sleep mode
4 kV ESD protection
Short circuit and overtemperature protected
Input bilevel feature for wake-up detection
Output bilevel feature for wake up call
Loss of Ground protection
Bus dominant timeout feature
Programmable slewrate
Ordering Code
Q67006-A9352
TLE 6255 G
P-DSO-14-8; -9
Type
TLE 6255 G
2
Description
Package
P-DSO-14-9 (SMD)
The TLE 6255 G is a special featured low speed transceiver for use in single wire
applications.
The device is primarily designed for use in single wire CAN systems operating with
various CSMA/CR (carrier sense multiple access/collision resolution) protocols such as
the BOSCH Controller Area Network (CAN).
The normal communication bitrate in CAN-systems is up to 33 kBit/s. For software or
diagnostic data download a high speed mode is offered that allows transmission rates
up to 100 kBit/s.
With many integrated features such as slewrate controlled output, loss of ground circuit,
bi-level wake-up and sleep mode for low power consumption the TLE 6255 G is
optimized for use in automotive applications.
The device is based on Smart Power Technology SPT
®
which allows bipolar and CMOS
control circuitry to be integrated with DMOS power devices on the same monolithic
circuitry.
Additional features like short circuit and overtemperature protection, over- and
undervoltage lockout are integrated. To enhance the reliability and robustness of the
TLE 6255 G the enhanced power SO-14 package is used in order to provide high
thermal capacity and low thermal resistance.
Data Sheet Rev. 2.5
1
2003-11-27
INFINEON [ INFINEON TECHNOLOGIES AG ]
