TECHNICAL DATA
IN74AC245
Octal 3-State Noninverting
Bus Transceiver
High-Speed Silicon-Gate CMOS
The IN74AC245 is identical in pinout to the LS/ALS245,
HC/HCT245. The device inputs are compatible with standard CMOS
outputs; with pullup resistors, they are compatible with LS/ALS
outputs.
The IN74AC245 is a 3-state noninverting transceiver that is used
for 2-way asynchronous communication between data buses. The
device has an active-low Output Enable pin, which is used to place the
I/O ports into high-impedance states. The Direction control determines
whether data flows from A to B or from B to A.
•
Outputs Directly Interface to CMOS, NMOS, and TTL
•
Operating Voltage Range: 2.0 to 6.0 V
•
Low Input Current: 1.0
µA;
0.1
µA
@ 25°C
•
High Noise Immunity Characteristic of CMOS Devices
•
Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74AC245N Plastic
IN74AC245DW SOIC
T
A
= -40° to 85° C for all
packages
PIN ASSIGNMENT
LOGIC DIAGRAM
FUNCTION TABLE
Control Inputs
Output
Enable
L
Direction
L
Operation
Data Transmitted
from Bus B to
Bus A
Data Transmitted
from Bus A to
Bus B
Buses Isolated
(High Impedance
State)
PIN 20=V
CC
PIN 10 = GND
L
H
H
X
X = don’t care
326