Intel
®
82562V 10/100 Mbps
Platform LAN Connect
Datasheet
Product Features
n
n
n
n
n
n
n
n
n
IEEE 802.3 10BASE-T/100BASE-TX
compliant physical layer interface
IEEE 802.3u Auto-Negotiation support
Digital Adaptive Equalization control
Link status interrupt capability
XOR tree mode support
3-port LED support (speed, link and
activity)
10BASE-T auto-polarity correction
LAN Connect Interface
PHY detects polarity, MDI-X, and cable
lengths. Auto MDI, MDIX crossover at all
speeds
n
n
n
n
n
n
n
Diagnostic loopback mode
1:1 transmit transformer ratio support
Low power (less than 300 mW in active
transmit mode)
Reduced power in “unplugged mode” (less
than 50 mW)
Automatic detection of “unplugged mode”
3.3 V device
81-pin Mold Cap package--10mm x 10mm
x 1.745mm; 0.635mm Ball, 1.0mm Pitch
Additional Features
n
n
n
The 82562V PLC supports strapping options that enable the following operating modes:
— LED support for three logic configurations.
— LAN disable function using one pin.
— Increased transmit strength.
The receive BER performance increases the margin for cable length.
Return Loss performance is improved.
Revision 1.00
January 2006
317757-001