MSA SERIES
5 WATT
DC/DC CONVERTERS
Dot on top of case
indicates pin one
Materials
Header Cold Rolled Steel/Nickel/Gold
Cover Cold Rolled Steel/Nickel
CASE C
BOTTOM VIEW
See Figure 20
Pins
Copper/Nickel/Gold
compression glass seal
1.075 max
(27.31)
for pin configurations.
Case dimensions in inches (mm)
Tolerance
0.005 (0.13) for three decimal places
0.01 (0.3) for two decimal places
unless otherwise specified
1.075 max
(27.31)
CAUTION
Heat from reflow or wave soldering may
damage the device. Solder pins
individually with heat application not
exceeding 300°C for 10 seconds per
pin.
FIGURE 19: CASE C MAXIMUM DIMENSIONS
BOTTOM VIEW CASE C1
MSA Series: Screening – Standard, ES, or 883
Projection Weld
Squared corner and dot on
top of case indicate pin one.
Seam Seal
0.932
(23.67)
1
8
2
3
7
4
5
0.025
(0.64)
dia.
6
0.132
(3.35)
0.000
FIGURE 20: CASE C1
Note: Although every effort has been made to render the case drawings at actual size, variations in the printing process may cause some distortion. Please refer
to the numerical dimensions for accuracy.
7