DC/DC C
ONVERTERS
2.00 (50.8)
0.00
0.25
0.65
2.00 (50.8)
0.95
1.25
MSM SERIES
5 WATT
1.65
0.02 (0.51)
0.312 max. (7.92)
Case dimensions in inches (mm)
Tolerance ±0.005 (0.13) for three decimal places, ±0.01 (0.3) for two decimal places unless otherwise specified. Pin
spacing tolerance is ±0.010
CAUTION
Maximum reflow temperature for surface mounting the MSM converter is 230°C for a maximum of 30 seconds. SN60,
62, or 63 are the recommended types of solder. Hand soldering should not exceed 300°C for 10 seconds per pin.
Note: Although every effort has been made to render the case drawings at actual size, variations in the printing process
may cause some distortion. Please refer to the numerical dimensions for accuracy.
F
IGURE
2: MSM S
ERIES
O
UTLINE
D
RAWING
Contact Information:
Interpoint Headquarters USA
Phone: 1-800-822-8782
+425-882-3100
Email:
power@intp.com
www.interpoint.com
Interpoint UK
Phone: +44-1252-815511
Email:
poweruk@intp.com
Interpoint France
Phone: +33-134285455
Email:
powerfr@intp.com
27922 DTS Rev B This revision supercedes all previous releases.
All technical information is believed to be accurate, but no responsibility is
assumed for errors or omissions. Interpoint reserves the right to make
changes in products or specifications without notice. MSM Series is a trade-
mark of Interpoint. Copyright © 2000-2001 Interpoint. All rights reserved.
5
INTERPOINT [ INTERPOINT CORPORATION COMPANY ]
