ARINC 600
BKAD/E/F
BKAD/E/F
Low insertion force contacts.
Both environmental and non- environmental
versions.
Polarizing posts that are removable from the
mating face.
Field replaceable inserts for size 22 and
power contacts.
Up to 800 size 22 contacts in one connector.
Crimp, coax, power, printed circuit and wire
wrappable post style contacts.
Uses standard DPX crimp, insertion/extraction
tooling.
Waveguide connections available.
BKAD/E
Rear Release/Rear Removable
Size 12, 16, 20, 22 Crimp Contacts
BKAF
Front Release/Front Removable
Size 22 Solder Tail and Wrap Post Contacts
BKAD/E connectors represent the standard
for new avionic systems developed to support
the air transportation market. Several important
design concerns have been addressed and
solved in this new series. High mating
forces of pluggable modules in a rack have been
reduced by approximately two-thirds.
The low insertion force contacts are also inter-
changeable with the contacts used in the DPX
series and permit retrofit of existing equipment.
This new connector is totally intermateable and
intermountable with ARINC 600 connectors now in
the field.
The BKAF permits the user to easily replace a
contact in case of problems, rather than disas-
semble the entire connector--it is available with
size 22 contacts in wrap post or solder-tail ver-
sions. The system maintains the advantages of low
insertion force technology incorporated in all ARINC
600 connectors.
Pos-Aline Connector Construction Feature
In the ARINC 600 connector series, Size 22 con-
tacts are the only size that utilize this design
feature. The hooded socket extends from its in-
sulator while the pin contacts are shrouded by its
front insulator.
All other contacts used in this series employ stan-
dard contact design.
The result is that the complement of contacts for
the plug connectors will consist of pin contacts for
size 22 and socket contacts for all others. The
receptacle contacts will be just the reverse, socket
contact for size 22 and pin contacts for the
balance.
Material Specifications
BKAD
Material
Shell & Waveguide
Finish
Insulator
Material
Material
Contacts
Finish
Termination
Grommets/Seals
O-Ring
Material
Material
Aluminum alloy
Alodine
1200
Thermoset
Copper alloy
Gold over Nickel
Crimp
N/A
N/A
BKAE
Aluminum alloy
Alodine
1200
Thermoset
Copper alloy
Gold over Nickel
Crimp
Silicone-based Elastomer
Silicone-based Elastomer
BKAF
Aluminum alloy
Alodine
1200
Thermoset
Copper alloy
Gold over Nickel
P.C./Wrap Post
N/A
N/A
Specifications
QQ A-591/A380
MIL-C-5541
N/A
QQ-C-533
MIL-G-45204
N/A
N/A
N/A
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
4
ITT [ ITT INDUSTRIES ]
