ZIF Connectors
Introduction
DL/DLM
DL/DLM Product Features
High pin count:
60, 96, 156, 260, 360, 624, 1248* or 2496*
contact positions.
Variety of contacts:
– Crimp
– Square Post
– Wrap Post
– Buss
– PC/RC
Metal or plastic housing.
Wide range of accessories.
Easy actuation by screwdriver, socket wrench
(DL1/2/3 only), allen wrench or actuating
handle (see accessories page 47).
The long life and rapid mating are achieved through
the use of our Zero Insertion Force design.
Contacts in the plug and receptacle do not touch
each other while the connector halves are being
engaged.
Zero Insertion Force Camming Instructions
It’s as easy as 1, 2, 3...
Step 1.
The plug is placed over the receptacle.
Step 2.
A ‘‘quarter turn’’ of an actuating shaft
mates all the contacts at once.
Step 3.
The ‘‘same quarter’’ turn also physically
locks the connector halves together.
Connector engagement force is zero, and the only
wear on the contacts occurs as they are pressed
together and lightly wiped past each other during
the camming and locking operation.
* Contact Cannon for details.
This is our ‘‘DL/DLM’’ series of connectors.
Step 1. Simply place it together.
Contacts aligned.
Step 2. Turn the cam a quarter turn.
Contacts engaged.
Step 3. It’s locked and mated.
Contacts are mated.
8
Dimensions are shown in mm (inch)
Dimensions subject to change
ITT [ ITT INDUSTRIES ]
