COMPONENTS PRODUCT INFORMATION
NEW
LCD interface connector compatible with high-speed differential
transmission
FI-X Series
CONNECTOR
MB-0014-7
March 2001
Technologies for LCD displays have progressed from XGA and SXGA to UXGA. With this progress,
transmission speed is also increasing. In addition, the demand for thinner LCDs is increasing along with
the growth of the market for more compact notebook PCs. The FI-X Series is a slimline connector
compatible with high-speed differential transmission to meet such demands.
Features
■
Compatible with high-speed differential transmission and high-level impedance matching
(90 to 100Ω)
■
Drastically improved grounding which is directly related to EMI characteristics.
■
1.5mm connector height and 1mm height above the PCB thanks to bottom type structure.
■
1mm contact pitch with impedance matching.
■
Compatible with FPC and cable by common use of board header.
Enables stable grounding to the PCB thanks to FPC relay used in other FI Series connectors.
General Specifications
■
No. of contacts: 14, 20, 30 (all signal)
D7 (only for differential transmission)
■
Applicable FPC: t0.14
±0.03
■
Applicable cable: AWG #30 to #40
■
Operating temperature: -40°C to +80°C
■
Contact resistance: Less than 40mΩ
■
Rated current: 1A per pin for both AC and DC
■
Rated voltage: 200V per pin for both AC and DC
■
Insulation resistance: Greater than 100MΩ
■
Withstand voltage: AC500Vr.m.s. for 1 minute
■
Pitch: 1mm
1/12
JAE [ JAPAN AVIATION ELECTRONICS INDUSTRY, LTD. ]
