BENCHTOP/RACKMOUNT PROGRAMMABLE SWITCHES
3
SB Model Specifications
Parameter
1
Single Common
C Configuration
Typical
Maximum
0.4 dB
0.4 dB
> 65 dB
25/35 dB
0.02 dB
± 0.03 dB
± 0.003 dB
± 0.01 dB
0.7 dB
0.7 dB
60/65 dB
20/30 dB
0.05 dB
± 0.05 dB
± 0.005 dB
± 0.025 dB
Multiple Common
D Configuration
Typical
Maximum
0.4 dB
0.4 dB
> 65 dB
25/35 dB
0.02 dB
± 0.03 dB
0.7 dB
0.7 dB
60/65 dB
20/30 dB
0.05 dB
± 0.05 dB
Multiple Common
E and F Configurations
Typical
Maximum
0.5 dB
0.5 dB
65 dB
> 25 dB
0.03 dB
± 0.03 dB
± 0.005 dB
± 0.02 dB
1.0 dB
1.0 dB
60 dB
20 dB
0.07 dB
± 0.05 dB
± 0.01 dB
± 0.04 dB
Insertion loss (IL)
Single-mode (SM)
Multimode (MM)
Return loss (RL)
2
SM standard/analog
MM
3
standard/analog
Polarization dependent loss (PDL) SM
IL stability
4
Repeatability
5
Sequential switching
Random switching
Crosstalk (maximum) SM
Maximum input power (optical)
Lifetime
Switching time
One channel
Each additional channel
Power supply
Power consumption
Control
Drivers for external switch modules
Operation temperature
Storage temperature
Humidity
Dimensions (W x H x D)
with rackmount kit (optional)
6
Weight
± 0.005 dB
± 0.01 dB
± 0.02 dB
± 0.04 dB
-80 dB
300 mW
> 80 million cycles
300 ms
12 ms
100 to 240 V, 50 to 60 Hz
100 V A maximum
Local and remote via GPIB and serial RS-232 interfaces
Four open collector drivers with maximum 100 mA sink current
0 to 55 °C
- 40 to 70 °C
maximum 95 % RH from 0 to 55 °C non-condensing
21.2 x 8.9 x 35.5 cm
48.3 x 8.9 x 35.5 cm
3.75 kg
1. Excluding connectors. All optical measurements taken after temperature has been stabilized for one hour, at ambient (room) conditions.
2. RL specification based on 1 m pigtail length.
3. Values shown for 62.5 µm diameter maximum fiber core.
4. Drift of any channel relative to reference channel at ± 3 °C deviation of ambient temperature over a seven-day period.
5. Measured between two consecutive readings over 100 cycles.
6. ED000899-A-00 standard rackmount kit, ED000899-A-01 Japan rackmount kit. Requires two kits to mount two units side-by-side.
Please specify part number when ordering (if needed).