SN SERIES FIBEROPTIC SWITCH
2
SN Series Dimensions Diagram
1.904 [48.36]
.714 [18.14]
.349 [8.86]
.230 [5.84]
.100 [2.54]
.730 [18.54]
1.855 [47.12]
.125 [3.18]
.135 [3.43]
.105 [2.67]
.405 [10.29]
.505 [12.83]
.29 [7.4]
.50 [12.7]
Pin #12
.000 [.00]
Pin #1
.300 [7.62]
.400 [10.16]
Ø .040 [1.02]
11 PL
Pin #6
(Specifications in inches [mm] unless otherwise noted.)
.167 [4.24]
1.625 [41.28]
.000 [.00]
.100 [2.54]
.200 [5.08]
.400 [10.16]
.500 [12.70]
PCB
NOTES: RECOMMENDED BOARD THICKNESS .063" [1.59]
SWITCH MOUNTING HOLE PATTERN
Specifications
Parameter
Wavelength range
Insertion loss
1
1x1, 1x2
2x2
Return loss
2
Polarization dependent loss
2
Repeatability
Crosstalk
Optical input power (continuous wave)
Switching time
Cycle rate
Power supply
3
Dimensions (W x H x D)
Weight
Operating temperature
Storage temperature
Humidity (non-condensing)
Qualification
Specification
1290 to 1330 and/or 1525 to 1610 nm
0.8 dB
1.0 dB
55 dB
0.1 dB
±0.05 dB
-60 dB
300 mW
9 ms
10 Hz
5 V DC/40 mA ±10%
48.4 x 8.7 x 18.1 mm
14 g
0 to 65 °C, or -5 to 70 °C short term
4
-40 to 85 °C
<85% RH, or 90% RH short term
4
GR-1221-CORE, GR-1073-CORE
1. Insertion loss is specified for the 1290 to 1330 nm and 1520 to 1570 nm wavelength ranges, all polarization states, and does not include connectors. Add 0.3 dB maximum
over operating temperature range. Add 0.1 dB maximum for extended wavelength operation up to 1610 nm.
2. Excluding connectors.
3. A 5 V DC 40 mA pulse of 20 ms duration is recommended.
4. The switch can be operated over the short term from -5 to 70 °C for 96 consecutive hours or less and a total of 15 days or less over a one year period.
JDSU [ JDS UNIPHASE CORPORATION ]
