GG-1141-20A
The JMK Mobile Power Conditioner is designed to
protect sensitive electronic hardware installed on autos,
buses, or trucks from damage or mal-function.
Automotive electrical systems create a lot of internal
electrical noise because of spark plugs, relays, electric
motors, and other electronic hardware.
As vehicles become older this noise can become even
more problematic because of worn contacts on switches,
dirty connections etc.
This Power Conditioner is painted with powdered epoxy
paint and designed to and meet MIL-STD-810.
The Conditioner performs the following:
* Eliminates High frequency RF noise
* Eliminates high voltage transients.
* Switches to battery backup if the alternator voltage
is too high or too low.
* Automatically returns to alternator power
* Maintains backup battery at optimum charge
* Provides a steady, filtered ignition sense level.
Operating voltage: 12 Vdc
Operating current: 20 amp.
Operating temperature: -40 c to 50 C
Internal battery charger: 13.8 V
High voltage cut-out level: 18.0 V
High voltage cut-out time: 5.0 ms
Low voltage battery cut-in level: 11.8 V
Low voltage battery cut-in time: 5.0 ms
Reverse polarity protected
Noise attenuation:
15 db at 10 Hz
35 db at 100 Hz
65 db (min) from 1000 hz to 1.0 Mhz
Order P/N: GG-1141-20A
USA
EUR
JMK Inc 15 Caldwell Dr. Amherst, NH 03031
JMK
Inc Glasgow
G13
1DN
Scotland UK
PH: 603 886-4100
FX: 603 886-4115
email: info@jmkfilters.com
PH: 44-(0)
7785310729
FX: 44-(0) 141
589 1884