1.6 x 0.8 mm SMD Chip LED Lamp
The Blue source color devices are made with InGaN
Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
1.6 mm x 0.8 mm SMD LED, 0.95 mm thickness
Low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 4000pcs / reel
Moisture sensitivity level : level 3
Home and smart appliances
Wearable and portable devices
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Observe precautions for handling
electrostatic discharge sensitive devices
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.15(0.006") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Iv (mcd) @ 2mA
is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAN8408 / 1203014442 Rev No: V.6B Date: 02/14/2017
Page 1 / 4