KOA SPEER ELECTRONICS, INC.
SS-203 R5
7-3 Characteristics
Item
Insulation
resistance
Requirement
More than 10
4
MΩ
Test Method
DC 500V, 1 minute
Between both terminals and center
of reverse side
V
More than 10
3
MΩ
DC 500V, 1 minute
Between both terminals and center
of protection coating
V
Dielectric
withstanding
voltage
Without distinct damage
DC 500V, 1 minute
Between both terminals and center
of protection coating
V
Terminal
strength
∆
R/R: Within ± 1%
∆
L/L: Within ± 2%
∆
Q/Q: Within ± 20%
No mechanical damage by
cracks or stripping, etc.
Soldered chip on wiring board A for
test is to be bent down to .118" (3 mm)
as below drawing
(Set condition)
Dimensions in inches (mm)
Wiring board A
for test
Chip coil
Support
(ø5)
Solder
1.77 (45.0)
Within
±2
1.77 (45.0)
PAGE 4 OF 7
Bolivar Drive
I
P.O. Box 547
I
Bradford, PA 16701
I
USA
I
814-362-5536
I
Fax 814-362-8883
I
www.koaspeer.com
Specifications given herein may be changed at any time without pr ior notice. Please confir m technical specifications before you order and/or use.