Model KS12
MULTICRYSTAL
PHOTOVOLTAIC
MODULE
TYPICAL OUTPUT 12 Wp
KS12
HIGHLIGHTS OF KYOCERA PHOTOVOLTAIC MODULES
Kyocera´s advanced cell processing technology and automated production facilities have produced a highly
efficient multicrystal photovoltaic module.
These cells are encapsulated between a tempered glass cover and an EVA pottant with PVF back sheet to
provide maximum protection from the severest environmental conditions.
The entire laminate is installed in an anodized aluminium frame to provide structural strength and ease of
installation.
APPLICATIONS
Microwave / radio repeater stations
Electrification of villages in remote areas
Medical facilities in rural areas
Power source for summer vacation homes
Emergency communication systems
Water quality and environmental data monitoring
systems
Navigation lighthouses, and ocean buoys
Pumping systems for irrigation, rural
water supplies and livestock watering
Aviation obstruction lights
Cathodic protection systems
Desalination systems
Recreational vehicles
Railroad signals
Sailboat charging systems
SPECIFICATIONS
Electrical Specifications
Maximum Power
Maximum Power Voltage
Maximum Power Current
Open Circuit Voltage
Short-Circuit Current
12 Watts
16.9 Volts
0.71 Amps
21.5 Volts
0.73 Amps
Physical Specifications
Length
Width
Depth
Weight
340 mm
352 mm
22 mm
2.2 kg
Note: The electrical specifications are under test conditions of Irradiance of
1 kW/m
2
, Spectrum of 1.5 air mass and cell temperature of 25ºC
Méjico 2145 – 1640 Martínez
Buenos Aires – Argentina
Tel: 54-11-4836-1040
Fax: 54-11-4836-0808/1381
info@solartec.com.ar
www.solartec.com.ar
SOLARTEC S.A.
The contents of this catalogue are subject to change without prior notice for further improvement.
KSS [ Kyocera Kinseki Corpotation ]
