欢迎访问ic37.com |
会员登录 免费注册
发布采购

MC145567DW 参数 Datasheet PDF下载

MC145567DW图片预览
型号: MC145567DW
PDF下载: 下载PDF文件 查看货源
内容描述: PCM编码解码滤波器 [PCM Codec-Filter]
分类和应用: PC
文件页数/大小: 18 页 / 1225 K
品牌: LANSDALE [ LANSDALE SEMICONDUCTOR INC. ]
 浏览型号MC145567DW的Datasheet PDF文件第2页浏览型号MC145567DW的Datasheet PDF文件第3页浏览型号MC145567DW的Datasheet PDF文件第4页浏览型号MC145567DW的Datasheet PDF文件第5页浏览型号MC145567DW的Datasheet PDF文件第6页浏览型号MC145567DW的Datasheet PDF文件第7页浏览型号MC145567DW的Datasheet PDF文件第8页浏览型号MC145567DW的Datasheet PDF文件第9页  
ML145554
ML145564
ML145557
ML145567
PCM Codec–Filter
Legacy Device:
Motorola MC145554, MC145557, MC145564, MC145567
The ML145554, ML145557, ML145564, and ML145567 are all per channel
PCM Codec–Filters. These devices perform the voice digitization and recon-
struction as well as the band limiting and smoothing required for PCM sys-
tems. They are designed to operate in both synchronous and asynchronous
applications and contain an on–chip precision voltage reference. The
ML145554 (Mu–Law) and ML145557 (A–Law) are general purpose devices
that are offered in 16–pin packages. The ML145564 (Mu–Law) and
ML145567 (A–Law), offered in 20–pin packages, add the capability of analog
loopback and push–pull power amplifiers with adjustable gain.
These devices have an input operational amplifier whose output is the input
to the encoder section. The encoder section immediately low–pass filters the
analog signal with an active R–C filter to eliminate very–high–frequency noise
from being modulated down to the pass band by the switched capacitor filter.
From the active R–C filter, the analog signal is converted to a differential sig-
nal. From this point, all analog signal processing is done differentially. This
allows processing of an analog signal that is twice the amplitude allowed by a
single–ended design, which reduces the significance of noise to both the invert-
ed and non–inverted signal paths. Another advantage of this differential design
is that noise injected via the power supplies is a common–mode signal that is
cancelled when the inverted and non–inverted signals are recombined. This
dramatically improves the power supply rejection ratio.
After the differential converter, a differential switched capacitor filter band-
passes the analog signal from 200 Hz to 3400 Hz before the signal is digitized-
by the differential compressing A/D converter.
The decoder accepts PCM data and expands it using a differential D/A con-
verter. The output of the D/A is low–pass filtered at 3400 Hz and sinX/X com-
pensated by a differential switched capacitor filter. The signal is then filtered
by an active R–C filter to eliminate the out–of–band energy of the switched
capacitor filter.
These PCM Codec–Filters accept both long–frame and short–frame industry
standard clock formats. They also maintain compatibility with Motorola’s fami-
ly of TSACs and MC3419/MC34120 SLIC products.
The ML145554/57/64/67 family of PCM Codec–Filters utilizes CMOS due
to its reliable low–power performance and proven capability for complex
analog/digital VLSI functions.
FEATURES
ML145554/57(16–Pin Package)
• Fully Differential Analog Circuit Design for Lowest Noise
• Performance Specified for Extended Temperature Range of – 40 to + 85°C
• Transmit Band–Pass and Receive Low–Pass Filters On–Chip
• Active R–C Pre–Filtering and Post–Filtering
• Mu–Law Companding ML145554
• A–Law Companding ML145557
• On–Chip Precision Voltage Reference (2.5 V)
• Typical Power Dissipation of 40 mW, Power Down of 1.0 mW at ±5 V
ML145564/67(20–Pin Package) — All of the Features of the ML145554/57 Plus:
• Mu–Law Companding ML145564
• A–Law Companding ML145567
• Push–Pull Power Drivers with External Gain Adjust
• Analog Loopback
Page 1 of 18
www.lansdale.com
Issue A
16
1
P DIP 16 = EP
PLASTIC DIP
CASE 648
ML145554/57
SOG 16 = -5P
SOG PACKAGE
CASE 751G
ML145554/57
16
1
20
1
P DIP 20 = RP
PLASTIC DIP
CASE 738
ML145564/67
SOG 20 = -6P
SOG PACKAGE
CASE 751D
ML145564/67
20
1
CROSS REFERENCE/ORDERING INFORMATION
LANSDALE
PACKAGE
MOTOROLA
P DIP 16
SO 16W
P DIP 16
SO 16W
P DIP 20
SO 20W
P DIP 20
SO 20W
MC145554P
MC145554DW
MC145557P
MC145557DW
MC145564P
MC145564DW
MC145567P
MC145567DW
ML145554EP
ML145554-5P
ML145557EP
ML145557-5P
ML145564RP
ML145564-6P
ML145567RP
ML145567-6P
Note:
Lansdale lead free (Pb) product, as it
becomes available, will be identified by a part
number prefix change from
ML
to
MLE.