FINAL
COM’L:-10
IND:-20
PALLV16V8-10 and PALLV16V8Z-20
Low Voltage, Zero Power 20-Pin EE CMOS
Universal Programmable Array Logic
DISTINCTIVE CHARACTERISTICS
x
Low-voltage operation, 3.3 V JEDEC compatible
x
x
x
x
x
x
x
x
x
x
x
x
— V
CC
= +3.0 V to +3.6 V
Pin and function compatible with all 20-pin PAL
®
devices
Electrically-erasable CMOS technology provides reconfigurable logic and full testability
Direct plug-in replacement for the PAL16R8 series
Designed to interface with both 3.3-V and 5-V logic
Outputs programmable as registered or combinatorial in any combination
Programmable output polarity
Programmable enable/disable control
Preloadable output registers for testability
Automatic register reset on power up
Cost-effective 20-pin plastic DIP, PLCC, and SOIC packages
Extensive third-party software and programmer support
Fully tested for 100% programming and functional yields and high reliability
GENERAL DESCRIPTION
The PALLV16V8 is an advanced PAL device built with low-voltage, high-speed, electrically-erasable
CMOS technology. It is functionally compatible with all 20-pin GAL devices. The macrocells
provide a universal device architecture. The PALLV16V8 will directly replace the PAL16R8, with the
exception of the PAL16C1.
The PALLV16V8Z provides zero standby power and high speed. At 30-
µ
A maximum standby
current, the PALLV16V8Z allows battery powered operation for an extended period.
The PALLV16V8 utilizes the familiar sum-of-products (AND/OR) architecture that allows users to
implement complex logic functions easily and efficiently. Multiple levels of combinatorial logic can
always be reduced to sum-of-products form, taking advantage of the very wide input gates
available in PAL devices. The equations are programmed into the device through floating-gate cells
in the AND logic array that can be erased electrically.
The fixed OR array allows up to eight data product terms per output for logic functions. The sum
of these products feeds the output macrocell. Each macrocell can be programmed as registered or
combinatorial with an active-high or active-low output. The output configuration is determined by
two global bits and one local bit controlling four multiplexers in each macrocell.
Publication#
17713
Amendment/0
Rev:
E
Issue Date:
November 1998
LATTICE [ LATTICE SEMICONDUCTOR ]
