Data Sheet
November 22, 2010
12V Pico TLynx
TM
6A: Non-Isolated DC-DC Power Modules
4.5Vdc –14Vdc input; 0.59Vdc to 5.5Vdc output; 6A Output Current
Features
Compliant to RoHS EU Directive 2002/95/EC (Z
versions)
Compatible in a Pb-free or SnPb reflow environment
(Z versions)
Wide Input voltage range (4.5Vdc-14Vdc)
Output voltage programmable from 0.59Vdc to
5.5Vdc via external resistor
Tunable Loop
response
TM
to optimize dynamic output voltage
RoHS Compliant
Applications
EZ-SEQUENCE
TM
Flexible output voltage sequencing EZ-SEQUENCE
(APTS versions)
Remote sense
Power Good signal
Fixed switching frequency
Output overcurrent protection (non-latching)
Overtemperature protection
Remote On/Off
Ability to sink and source current
Cost efficient open frame design
Small size: 12.2 mm x 12.2 mm x 7.25 mm
(0.48 in x 0.48 in x 0.29 in)
Wide operating temperature range [-40°C to
105°C(Ruggedized: -D), 85°C(Regular)]
Ruggedized (-D) version able to withstand high
levels of shock and vibration
UL*
60950-1Recognized,
CSA
C22.2 No. 60950-1-
‡
03 Certified, and
VDE
0805:2001-12 (EN60950-1)
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
†
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Industrial equipment
Vout+
Vin+
VIN
PGOOD
SEQ
VOUT
SENSE
RTUNE
MODULE
Cin
Q1
CTUNE
Co
ON/OFF
GND
TRIM
RTrim
Description
The 12V Pico TLynx 6A power modules are non-isolated dc-dc converters that can deliver up to 6A of output
current. These modules operate over a wide range of input voltage (V
IN
= 4.5Vdc-14Vdc) and provide a precisely
regulated output voltage from 0.59Vdc to 5.5Vdc, programmable via an external resistor. Features include remote
On/Off, adjustable output voltage, over current and over temperature protection, and output voltage sequencing
(APTS versions). The Ruggedized version (-D) is capable of operation up to 105°C and withstand high levels of
TM
shock and vibration. A new feature, the Tunable Loop , allows the user to optimize the dynamic response of the
converter to match the load with reduced amount of output capacitance leading to savings on cost and PWB area.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
‡
TM
CSA
is a registered trademark of Canadian Standards Association.
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS06-136 ver. 1.12
PDF name: APTS006A0X_ds.pdf
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
