Data Sheet
June 24, 2008
Austin Microlynx
TM
II SIP Non-isolated Power Modules:
2.4Vdc – 5.5Vdc input; 0.75Vdc to 3.63Vdc Output; 6A Output Current
RoHS Compliant
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Flexible output voltage sequencing EZ-
TM
SEQUENCE
Delivers up to 6A output current
High efficiency – 96% at 3.3V full load (V
IN
= 5.0V)
EZ-SEQUENCE
TM
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor powered applications
Small size and low profile:
25.4 mm x 12.7mm x 6.68 mm
(1.00 in x 0. 5 in x 0.263 in)
Low output ripple and noise
High Reliability:
Calculated MTBF = 12.8M hours at 25 C Full-load
Programmable Output voltage
Line Regulation: 0.3% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL*
60950-1Recognized,
CSA
C22.2 No.
‡
60950-1-03 Certified, and
VDE
0805:2001-12
(EN60950-1) Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
†
o
Description
Austin MicroLynx II SIP power modules are non-isolated dc-dc converters that can deliver up to 6A of output
current with full load efficiency of 96.0% at 3.3V output. These modules provide a precisely regulated output voltage
programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input voltage (V
IN
= 2.4 –
TM
TM
5.5Vdc). Austin MicroLynx II has a sequencing feature, EZ-SEQUENCE that enable designers to implement
various types of output voltage sequencing when powering multiple modules on board. Their open-frame
construction and small footprint enable designers to develop cost- and space-efficient solutions. In addition to
sequencing, standard features include remote On/Off, programmable output voltage and over current protection.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
‡
TM
CSA
is a registered trademark of Canadian Standards Association.
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-024 ver. 1.22
PDF name: microlynx_II_sip_ds.pdf