Data Sheet
12V Austin LynxTM SMT Non-isolated Power Modules Programmable:
10 – 14Vdc input; 0.75Vdc to 5.5Vdc Output; 10A output current
April 8, 2008
Characteristic Curves (continued)
The following figures provide typical characteristics for the 12V Austin Lynx Programmable SMT modules at 25ºC.
TIME, t (2 ms/div)
TIME, t (10μs/div)
Figure 13. Transient Response to Dynamic Load
Figure 16. Typical Start-Up with application of Vin with
Change from 100% of 50% full load (Vo = 5.0 Vdc, Cext low-ESR polymer capacitors at the output (7x150 μF)
= 2x150 μF Polymer Capacitors).
(Vin = 12Vdc, Vo = 5.0Vdc, Io = 10A, Co = 1050 μF).
TIME, t (1 ms/div)
TIME, t (2 ms/div)
Figure 14. Typical Start-Up Using Remote On/Off (Vin
= 12.0Vdc, Vo = 5.0Vdc, Io = 10.0A).
Figure 17 Typical Start-Up Using Remote On/Off with
Prebias (Vin = 12.0Vdc, Vo = 2.5Vdc, Io = 1.0A, Vbias
=1.2Vdc).
TIME, t (1 ms/div)
TIME, t (10ms/div)
Figure 15. Typical Start-Up Using Remote On/Off with
Low-ESR external capacitors (Co= 5000μF) (Vin =
12.0Vdc, Vo = 5.0Vdc, Io = 10.0A, Co = 1050μF).
Figure 18. Output short circuit Current (Vin = 12.0Vdc,
Vo = 0.75Vdc).
LINEAGE POWER
8