Data Sheet
January 20, 2009
Austin Lynx
TM
SMT Non-isolated Power Modules:
3.0Vdc –5.5Vdc Input; 0.75Vdc to 3.63Vdc Output;10A Output Current
RoHS Compliant
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Delivers up to 10A output current
High efficiency – 95% at 3.3V full load (V
IN
= 5.0V)
Small size and low profile:
33.0 mm x 13.5 mm x 8.28 mm
(1.30 in x 0.53 in x 0.326 in)
Low output ripple and noise
High Reliability:
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
Calculated MTBF = 15.7 M hours at 25
o
C Full-load
Constant switching frequency (300 kHz)
Output voltage programmable from 0.75 Vdc to
3.63Vdc via external resistor
Line Regulation: 0.3% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Remote Sense(optional)
Over temperature protection
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL*
60950-1Recognized,
CSA
C22.2 No. 60950-1-
03 Certified, and
VDE
‡
0805:2001-12 (EN60950-1)
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
†
Description
Austin Lynx
TM
SMT (surface mount technology) power modules are non-isolated dc-dc converters that can deliver
up to 10A of output current with full load efficiency of 95% at 3.3V output. These modules provide a precisely
regulated output voltage programmable via an external resistor from 0.75Vdc to 3.63Vdc over a wide range of input
voltage (V
IN
= 3.0 – 5.5Vdc). Their open-frame construction and small footprint enable designers to develop cost-
and space-efficient solutions. Standard features include remote On/Off, remote sense, programmable output
voltage, over current and over temperature protections.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
‡
CSA
is a registered trademark of Canadian Standards Association.
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS04-031 ver. 1.54
PDF name: lynx_po_smt.pdf