Data Sheet
March 2008
FLTR100V10 Filter Module
75 Vdc Input Maximum, 10 A Maximum
Features
RoHS Compliant
n
n
n
Compatible with RoHS EU Directive 200295/EC
Compatible in Pb- free or SnPb reflow environment
Small size: 51 mm x 28 mm x 12 mm
(2.0 in. x 1.1 in. x 0.46 in.)
Optimized for use with high-frequency dc-to-dc
power modules
Printed-circuit board mountable
Operating case temperature range:
–40 °C to +100 °C
UL*
60950 Recognized,
CSA
†
C22.2 No. 60950-00
Certified; VDE 0805 (IEC60950) Licensed
CE mark meets 73/23/EEC and 93/68/EEC
directives
‡
n
n
n
The FLTR100V10 Filter Module is encapsulated in a small,
nonconductive plastic case.
n
Application
n
n
Common-mode and differential-mode filtering of
power supply dc input and output lines
Computer applications
Communications equipment
n
n
Options
n
n
n
Short pin: 2.8 mm (o.110 in.)
Short pin: 3.7 mm (0.145 in.)
Short pin: 4.6 mm (0.180 in.)
Description
The FLTR100V10 Filter Module is designed to reduce the conducted common-mode and differential-mode
noise on input or output lines of high-frequency switching power supplies. The module has a maximum current
rating of 10 A. It provides high insertion loss throughout the frequency range regulated by the U.S. Federal
Communications Commission (FCC) and the International Special Committee on Radio Interference (CISPR)
for conducted emissions.
The module is 51 mm long, 28 mm wide, and 12 mm high (2.0 in. x 1.1 in. x 0.46 in.) and mounts on a PC board
in a natural convection or forced-air environment.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
CSA
is a registered trademark of Canadian Standards Assn.
‡ This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should
be followed. (The CE mark is placed on selected products.)
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
