Data Sheet
May 16, 2008
HC006/010 Series DC-DC Converter Power Modules:
18-36Vdc Input; 3.3V-5Vdc Output; 6.6A-10A Output Current
Features
RoHS Compliant
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Delivers up to 10A Output current
5V (6.6A), 3.3V (10A)
High efficiency – 90% at 3.3V full load
Low Output voltage- supports migration to future IC
supply voltages down to 1.0V
Low output ripple and noise
Small Size and low profile
Applications
Wireless Networks
Distributed power architectures
Optical and Access Network Equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
47.2mm x 29.5mm x
8.5mm
(1.86 x 1.16 x 0.335 in)
Surface mount or Through hole (TH)
Remote On/Off
Output overcurrent/Over voltage protection
Over temperature protection
Single Tightly regulated output
Output voltage adjustment trim
±10%
Wide operating temperature range (-40°C to 85°C)
Meets the voltage insulation requirements for ETSI
300-132-2 and complies with and is Licensed for
Basic Insulation rating per EN 60950
CE mark meets 73/23/EEC and 93/68/EEC
directives
§
UL*
60950-1Recognized,
CSA
†
C22.2 No. 60950-1-
‡
03 Certified, and
VDE
0805:2001-12 (EN60950-1)
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Options
Remote On/Off logic (positive or negative)
Surface Mount (-S Suffix)
Trimmed leads
Description
The HC series power modules are isolated dc-dc converters that operate over a wide input voltage range of 18 to 36
Vdc and provide one precisely regulated output. The output is fully isolated from the input, allowing versatile polarity
configurations and grounding connections. The modules exhibit high efficiency, e.g. typical efficiency of 90%
3.3/10A, 91% at 5V/6A. Built-in filtering for both input and output minimizes the need for external filtering. These
open frame modules are available either in surface-mount (-S) or in through-hole form.
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
‡
CSA
is a registered trademark of Canadian Standards Association.
VDE
is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-122 ver. 1.44
PDF name: hc006-010_series_ds.pdf
LINEAGEPOWER [ LINEAGE POWER CORPORATION ]
