Data Sheet
September 20, 2004
JBW050F Power Modules: dc-dc Converter;
36 to 75 Vdc Input, 3.3 Vdc Output; 33 W
Features
■
Small size: 61.0 mm x 57.9 mm x 12.7 mm
(2.40 in. x 2.28 in. x 0.50 in.)
High power density
High efficiency: 81% typical
Low output noise
Constant frequency
Industry-standard pinout
Metal case
2:1 input voltage range
Overtemperature protection
Overcurrent and overvoltage protection
Remote sense
Remote on/off
Adjustable output voltage: 60% to 110% of V
O, nom
Case ground pin
ISO9001 Certified manufacturing facilities
UL*
60950 Recognized,
CSA
†
C22.2 No. 60950-00
Certified, and EN 60950 (VDE0805):2001-12
Licensed
CE mark meets 73/23/EEC and 93/68/EEC
directives
‡
■
■
■
■
■
■
■
■
■
The JBW050F Power Module use advanced, surface-mount
technology and deliver high-quality, efficient, and compact
dc-dc conversion.
Applications
■
■
■
■
■
■
Distributed power architectures
■
Workstations
■
Computer equipment
■
Communications equipment
■
Options
■
■
■
■
Heat sinks available for extended operation
Choice of remote on/off logic configuration
Short Pins: 3.7 mm ± 0.25 mm
(0.145 in ± 0.010 in)
Approved for basic insulation (-B suffix)
■
*
UL
is a registered trademark of Underwriters Laboratories, Inc.
†
CSA
is a registered trademark of Canadian Standards Assn.
‡ This product is intended for integration into end-use equipment.
All the required procedures for CE marking of end-use equip-
ment should be followed. (The CE mark is placed on selected
products.)
Description
The JBW050F Power Module is a dc-dc converter that operates over an input voltage range of 36 Vdc to 75
Vdc and provides a precisely regulated 3.3 Vdc output. The output is fully isolated from the input, allowing a
versatile polarity configuration and grounding connections. The module has a maximum power rating of 33 W
at a typical full-load efficiency of 81%.
The modules are DC board-mountable and encapsulated in metal cases. Threaded-through holes are provided to
allow easy mounting or addition of a heat sink for high-temperature applications. The standard feature set
includes remote sensing, output trim, and remote on/off for convenient flexibility in distributed power applications.